1.On a relatively flat ground, Place thefloor support, As below picture (The spacing between adjacent brackets is500mm/1000mm)

2.The positioning hole at the bottom of thecabinet body is connected with the positioning column on the surface of theground support;

The positioning hole of the cabinet body shall be connected andfixed with the four brackets in turn

(The arrow direction on the back of the cabinetbody shall be consistent).

3.Connect the power line and signal line onthe back of the cabinet with another cabinet in turn (Note:the direction of the cabinet body is consistent).

4.The cabinets are successively connectedaccording to the above contents, As below picture.

5.After the installation of the screen bodyis completed, It can be decided whether to install the edge to enhance thebeauty according to the actual demand.

6.During the use of the screen body shouldbe regularly maintained to ensure the lifetime of the screen.